7360 FX xPON 通用配置手册
R4.X
(宽带部分)
编制Prepare 验证Verify 审核Review 批准Approve Cao Xuebing Bao Ziming Xie Liwen、Xia Hui Zhu Que History
版本号 日期 负责人 概述 Ed 1.0
2011-11-27 2012-01-18 Cao Xuebing Cao Xuebing Document Creation LACP Modification
目录
1. 前言 ............................................................................................................................................... 4 2. 硬件部分 ....................................................................................................................................... 4
2.1. 板卡支持 ........................................................................................................................... 4 2.2. 板卡简介 ........................................................................................................................... 4 2.3. CT 设置 ........................................................................................................................... 4 2.4. 登陆方式 ........................................................................................................................... 4 3. 软件版本 ....................................................................................................................................... 5
3.1. 软件确认 ........................................................................................................................... 5 3.2. 软件更新 ........................................................................................................................... 5 4. 设备基本配置 ............................................................................................................................... 5
4.1. 板卡配置 ........................................................................................................................... 5 4.2. 管理地址(OAM)配置 ................................................................................................. 6 4.3. SNMP参数配置 ............................................................................................................... 7 5. GPON数据配置 .......................................................................................................................... 7 5.1. ONU配置 ......................................................................................................................... 7 5.2. Profile模板配置 .............................................................................................................. 8 5.3. VLAN配置 ....................................................................................................................... 9 5.4. 用户数据配置 ................................................................................................................. 10 6. IGMP(组播)配置 .................................................................................................................. 12 7. LACP (多上联)配置 ................................................................................................................... 13 8. ACL(访问控制列表)配置..................................................................................................... 13 9. 外层VLAN透传 ........................................................................................................................ 14 10. 11.
VLAN 转换............................................................................................................................ 15 帐号权限配置 ......................................................................................................................... 15
12. 镜像配置 ................................................................................................................................. 16 附录1、 GPON配置规范 ............................................................................................................... 17
基 础 篇
1. 前言
此文档可作为7360 FX xPON 宽带部分的基础配置参考手册,有关具体内容请参阅相关技术文档。阅读此文档时请关注 特别注意点
2. 硬件部分
2.1. 板卡支持
7360 FX xPON 支持以下硬件板卡:
Mnemonic Unit Name FANT-F Combined NT Unit - version F NGLT-A GPON Line Termination Board - version A FPLT-A EPON Line Termination Board - version A UDS code Number 3FE53701ACAA 3FE64279AAAA 3FE53711AAAA
2.2. 板卡简介
FANT-F NT板卡,4端口GE/10GE SFP上联光模块或GE/FE电模块 NGLT-A GPON LT板卡,8端口GPON线卡(SFP) FPLT-A EPON LT板卡,8端口EPON线卡(SFP)
2.3. CT 设置
串口设置成默认参数:
“9600bps with 8 data bit, no parity, one stop bit and flow control set to none”
2.4. 登陆方式
串口方式登陆: 在操作终端直接输入”enter”键,系统提示信息如下:
Would you like a CLI(C) or a TL1 login(T) or TL1 normal session(N) ? [N]: c (登入CLI 模式) login: isadmin password: i$@mad-系统默认的密码,会提示登陆者修改密码,如密码已改,直接用改完的密码登陆
Welcome to ISAM Your password is expired ! enter new password: ans#150 提示修改默认密码 re-enter password: ans#150 The new password is accepted. isadmin>#
相关推荐: