R16 Tina开发v1.1

# This specifies the directory where we're going to build the program. # The root build directory, $(BUILD_DIR), is by default the build_mipsel # directory in your OpenWrt SDK directory PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)

include $(INCLUDE_DIR)/package.mk

# Specify package information for this program. # The variables defined here should be self explanatory. # If you are running Kamikaze, delete the DESCRIPTION # variable below and uncomment the Kamikaze define # directive for the description below define Package/cameratest SECTION:=utils CATEGORY:=Utilities

TITLE:=camerateset just test the camera DEPENDS:=+libpthread endef

# Uncomment portion below for Kamikaze and delete DESCRIPTION variable above define Package/cameratest/description endef

# Specify what needs to be done to prepare for building the package. # In our case, we need to copy the source files to the build directory. # This is NOT the default. The default uses the PKG_SOURCE_URL and the # PKG_SOURCE which is not defined here to download the source from the web. # In order to just build a simple program that we have just written, it is # much easier to do it this way. define Build/Prepare endef

define Build/Configure endef

define Build/Compile

$(MAKE) -C $(PKG_BUILD_DIR) \\

CC=\mkdir -p $(PKG_BUILD_DIR) $(CP) ./src/* $(PKG_BUILD_DIR)/

If you can't figure out what this program does, you're probably brain-dead and need immediate medical attention.

endef

CFLAGS=\LDFLAGS=\LIBS=\all

# We do not need to define Build/Configure or Build/Compile directives # The defaults are appropriate for compiling a simple program such as this one

# Specify where and how to install the program. Since we only have one file, # the helloworld executable, install it by copying it to the /bin directory on # the router. The $(1) variable represents the root directory on the router running # OpenWrt. The $(INSTALL_DIR) variable contains a command to prepare the install # directory if it does not already exist. Likewise $(INSTALL_BIN) contains the # command to copy the binary file from its current location (in our case the build # directory) to the install directory. define Package/cameratest/install endef

# This line executes the necessary commands to compile our program. # The above define directives specify all the information needed, but this # line calls BuildPackage which in turn actually uses this information to # build a package.

$(eval $(call BuildPackage,cameratest))

$(INSTALL_DIR) $(1)/bin

$(INSTALL_BIN) $(PKG_BUILD_DIR)/cameratest $(1)/bin/

2. 源代码放置在src中

3. Src下有编译source的makefile

4通过SSH登陆到R16，进入bin里面，运行./cameratest 5 输入命令echo “480X640:146”>command 6得到yuv图像文件，用yuvplayer打开

修改分区表

/home/looq/Documents/tina/package/boot/uboot-sunxi/bootloader/sun8iw5p1/configs/evb/sys_partition.fex

修改56行，为65536，修改62行，为65536

Wifi连接

1. 用adb连接tina 2. wifitestssid password

3. 用ifconfig查询ip