（完整版） - 毕业设计外文参考文献59587019

[1] H.C. Furtado，L.H. de Almeida，I. Le May．Precipitation in 9Cr–1Mo

steel after creep deformation[J]．Materials Characterization，2007，58：72–77．

[2] Sasaki，Terufumi，Kobayashi，et al．Production and properties of

seamless modified 9Cr-1Mo steel boiler tubes[R]．Kaw asaki Steel Technical Report，1991，25(4)：78-87．

[3] Ahmed Shibli，Fred Starr．Some aspects of plant and research

experience in the use of new the phase stability of precipitates in low Cr Inside Bore and Lamination Defects in Rotary Piercing for Materials with Poor Hot Workability [J]．ISIJ International，1997，37(2)：．

[4] Ken-ichiro Mori，Hidenori Yoshimura，Kozo Osakada．Simplified

three- dimensional simulation of rotary piercing of seamless pipe by rigid-plastic finite-element method[J]．Journal of Materials Processing Technology，1998，80-81：．

[5] Y van Chastel，Aliou Diop，Silvio Fanini，et al．Finite Element

Modeling of Tube Piercing and Creation of a Crack[J]．Int J Mater Form，2008，Suppl 1：．

[6] Hyoung Wook Lee，Geun An Lee，Eung Kim，et al．Prediction of plug

tip position in rotary tube piercing mill using simulation and experiment[J]．International Journal of Modern Physics B，2008，22(31-32)：．

[7] Kazutake Komori．Simulation of Mannesmann piercing process by

the

three-dimensional

rigid-plastic

finite-element

method[J]．International Journal of Mechanical Sciences，2005，47：．

[8] Hayashi C，Yamakawa T．Influence of feed and cross angle on rotary

forging effects and redundant shear deformation in rotary piercing process[J]．ISIJ International，1997，37：．

[9] A Ghiotti，S Fanini，S Bruschi，et al．Modeling of the Mannesmann

effect[J]．CIRP Annals-Manufacturing Technology，2009，58：． [10] E.I. Panov．Shear Stresses and Their Dependence on Different Process

Parameters in The Helical Rolling of Solid Semifinished Products[J]．Metallurgist，2005，49(7-8)：．

[11] E.I. Panov．Certain Aspects of The Stress-Strain State of Semifinished

Products in Helical Rolling[J]．Metallurgist，2003，47(11-12)：． [12] E.I. Panov．Effect of thrust and tension on the radial stresses in of

the tube forming process in Diescher’s mill [J]．Journal of Materials Processing Technology，2006，177：．

[13] J C Prince，R Maro?o，F León．Thermomechanical analysis of a

piercing mandrel for the production of seamless steel tubes[J]．J. Process Mechanical Engineering，2003，217：．

[14] Kazutake Komori，Kouta Mizuno．Study on plastic deformation in

cone-type rotary piercing process using model piercing mill for modeling clay[J]．Journal of Materials Processing Technology，2009，209：．

[18] Kazutake Komori, Kouta Mizuno. Study on plastic deformation in

cone-type rotary piercing process using model piercing mill for modeling clay [J]. Journal of Materials Processing Technology, 2009, Vol. 209, pp..

[19] J C Prince, R Maro?o, F León. Thermomechanical analysis of a

piercing mandrel for the production of seamless steel tubes [J]. J. Process Mechanical Engineering, 2003, Vol. 217, pp..

[20] Z. Pater, J. Kazanecki, J. Bartnicki. Three dimensional

thermo-mechanical simulation of the tube forming process in Diescher’s mill [J]. Journal of Materials Processing Technology, 2006, Vol. 177, pp..

[21] A Ghiotti, S Fanini, S Bruschi, et al. Modeling of the Mannesmann

effect [J]. CIRP Annals-Manufacturing Technology, 2009, Vol. 58, pp..

[22] Kazutake Komori. Simulation of Mannesmann piercing process by

the three-dimensional rigid-plastic finite-element method [J]. International Journal of Mechanical Sciences, 2005, Vol. 47, pp.. [23] Hayashi C, Yamakawa T. Influence of feed and cross angle on rotary

forging effects and redundant shear deformation in rotary piercing process [J]. ISIJ International, 1997, Vol. 37, pp..

[24] Elisabetta Ceretti, Claudio Glaudio, Aldo Attanasio. 3D Simulation

and Validation of Tube Piercing Process [C]. NUMIFORM 07 Materials and Design: Modling, Simulation and Applications, 2007, pp..