Generative Shape Design Detailed Steps
3. You are going to Insert a JOIN operation to assemble all the Offset surfaces and the Blend surface
into one single surface.
? Multi select the seven Offsets and the created blend.
? ?
Click on the Join icon .
All the pre-selected objects are added to the join list. Click on OK to confirm the Join creation.
COPYRIGHT DASSAULT SYSTEMES 2002 5
Generative Shape Design Detailed Steps
4. You are going to Extract a Boundary Curve from this JOIN surface.
? Select the Boundary icon .
?
Select an edge of the Join as shown below.
? Click on OK to confirm the Boundary curve creation.
COPYRIGHT DASSAULT SYSTEMES 2002 6
Generative Shape Design Detailed Steps
5. You are going to Create a Sweep Surface using the circular section curve (Output1) per parameters
on the right.
? ?
Click on the sweep icon .
In the Swept Surface Definition dialog box choose a Line Profile type and ’’With reference surface’’ Subtype.
?
Select the Output1 circle as Guide curve1 and the Output1-Plane as Reference surface.
COPYRIGHT DASSAULT SYSTEMES 2002 7
Generative Shape Design ? Key in –88 degrees as Angle value and 100mm as Length 1
? Click on OK to confirm the Swept Surface creation.
6. You are going to create a Loft tangent to the Join and the Sweep surfaces
? Select the Loft icon .
?
Select the Output1 as first Section and the Sweep.1 as tangent surface.
COPYRIGHT DASSAULT SYSTEMES 2002 Detailed Steps
8
相关推荐：
loading