Netapp存储映射到AIX操作系统操作手册

来源：用户分享时间：2025/6/30 19:53:02 本文由

说明：文章内容仅供预览，部分内容可能不全，需要完整文档或者需要复制内容，请下载word后使用。下载word有问题请添加微信号:xxxxxxx或QQ：xxxxxx 处理（尽可能给您提供完整文档），感谢您的支持与谅解。

+-----------------------------------------------------------------------------+

Installation Summary --------------------

Name Level Part Event Result -------------------------------------------------------------------------------

NetApp.SAN_toolkit.sanlun 5.1.0.0 USR APPLY SUCCESS [tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#] [tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#] [tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#] [tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#] [tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]

[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]which sanlun /usr/bin/sanlun

[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]cd /opt/NetApp [tsm2:/opt/NetApp#]ls

MPIO_Host_Utilities_Kit santools [tsm2:/opt/NetApp#]cd santools [tsm2:/opt/NetApp/santools#]ls

NOTICE.PDF NOTICE.TXT bin man [tsm2:/opt/NetApp/santools#]cd bin [tsm2:/opt/NetApp/santools/bin#]ls san_version sanlun

[tsm2:/opt/NetApp/santools/bin#]sanlun lun show no controller LUNs available [tsm2:/opt/NetApp/santools/bin#] [tsm2:/opt/NetApp/santools/bin#]

[tsm2:/opt/NetApp/santools/bin#]cfgmgr -v #存储那边配置好，映射好后，AIX开始扫描 cfgmgr is running in phase 2

[tsm2:/opt/NetApp/santools/bin#] [tsm2:/opt/NetApp/santools/bin#] [tsm2:/opt/NetApp/santools/bin#]lspv

hdisk0 00c59412a7d7466a rootvg active hdisk1 00c3afa442c5c5f6 rootvg active hdisk2 none None hdisk3 none None hdisk4 none None hdisk5 none None hdisk6 none None hdisk7 none None hdisk8 none None hdisk9 none None hdisk10 none None

hdisk11 none None [tsm2:/opt/NetApp/santools/bin#]用sanlun 命令查看

其实还需要设置磁盘属性，要看netapp的官方文档设置deep ,queue_depth等； [tsm2:/opt/NetApp/santools/bin#]sanlun lun show

controller: lun-pathname device filename adapter protocol lun size lun state

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_06 hdisk10 fcs0 FCP 500.1g (536952700928) GOOD

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_07 hdisk11 fcs0 FCP 500.1g (536952700928) GOOD

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_00 hdisk4 fcs0 500.1g (536952700928) GOOD

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_01 hdisk5 fcs0 500.1g (536952700928) GOOD

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_02 hdisk6 fcs0 500.1g (536952700928) GOOD

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_03 hdisk7 fcs0 500.1g (536952700928) GOOD

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_04 hdisk8 fcs0 500.1g (536952700928) GOOD

FAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_05 hdisk9 fcs0 500.1g (536952700928) GOOD

[tsm2:/opt/NetApp/santools/bin#]lsdev -Cc disk hdisk0 Available 01-08-00 SAS Disk Drive hdisk1 Available 01-08-00 SAS Disk Drive hdisk2 Available 01-08-00 SAS Disk Drive hdisk3 Available 01-08-00 SAS Disk Drive

hdisk4 Available 05-00-02 MPIO NetApp FCP Default PCM Disk hdisk5 Available 05-00-02 MPIO NetApp FCP Default PCM Disk hdisk6 Available 05-00-02 MPIO NetApp FCP Default PCM Disk hdisk7 Available 05-00-02 MPIO NetApp FCP Default PCM Disk hdisk8 Available 05-00-02 MPIO NetApp FCP Default PCM Disk hdisk9 Available 05-00-02 MPIO NetApp FCP Default PCM Disk hdisk10 Available 05-00-02 MPIO NetApp FCP Default PCM Disk hdisk11 Available 05-00-02 MPIO NetApp FCP Default PCM Disk

[tsm2:/opt/NetApp/santools/bin#]sanlun lun show -p # -p 参数查看多路径状态 ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_05 LUN: 5

LUN Size: 500.1g (536952700928) Host Device: hdisk9 LUN State: GOOD

Controller_CF_State: Cluster Enabled Controller Partner: FAS6220-2B Multipath Provider: AIX Native

FCP FCP FCP FCP FCP FCP Multipathing Algorithm: round_robin

--------- ----------- ------ ------ ----------- ----------

MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority --------- ----------- ------ ------ ----------- ----------

Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1

ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_04 LUN: 4

LUN Size: 500.1g (536952700928) Host Device: hdisk8 LUN State: GOOD

Controller_CF_State: Cluster Enabled Controller Partner: FAS6220-2B Multipath Provider: AIX Native

Multipathing Algorithm: round_robin

--------- ----------- ------ ------ ----------- ----------

MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority --------- ----------- ------ ------ ----------- ----------

ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_03 LUN: 3

LUN Size: 500.1g (536952700928) Host Device: hdisk7

LUN State: GOOD

Controller_CF_State: Cluster Enabled Controller Partner: FAS6220-2B Multipath Provider: AIX Native

Multipathing Algorithm: round_robin

--------- ----------- ------ ------ ----------- ----------

MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority --------- ----------- ------ ------ ----------- ----------

ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_02 LUN: 2

LUN Size: 500.1g (536952700928) Host Device: hdisk6 LUN State: GOOD

Controller_CF_State: Cluster Enabled Controller Partner: FAS6220-2B Multipath Provider: AIX Native

Multipathing Algorithm: round_robin

--------- ----------- ------ ------ ----------- ----------

MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority --------- ----------- ------ ------ ----------- ----------

搜索更多关于： Netapp存储映射到AIX操作系统操作手册的文档

Netapp存储映射到AIX操作系统操作手册.doc 将本文的Word文档下载到电脑，方便复制、编辑、收藏和打印

下载这篇word文档

本文链接：https://www.diyifanwen.net/c72x060jr598uhsn07rqv_2.html（转载请注明文章来源）