Cisco.WLC无线配置手册 

WLC配置手册 基本配置 1．初始设置

无 线配 置 手 册

连接到WLC的console口，启动超级终端或其它终端软件，把com口属性设置还原为默认值（如下图），点确定应用配置

回车进入命令行管理界面

选择5，清除原有设置，并进行初始设置 Welcome to the Cisco Wizard Configuration Tool Use the '-' character to backup

System Name [Cisco_40:4a:03]: C1-CONTROLLER-01 Enter Administrative User Name (24 characters max): admin Enter Administrative Password (24 characters max): minshenma

Service Interface IP Address Configuration [none][DHCP]: 192.168.1.1 Management Interface IP Address: 10.1.128.101 Management Interface Netmask: 255.255.255.0 Management Interface Default Router: 10.1.128.254 Management Interface VLAN Identifier (0 = untagged): 128 Management Interface DHCP Server IP Address:10.1.32.1 AP Manager Interface IP Address: 10.1.128.103 AP Manager Interface DHCP Server : 10.1.32.1 AP Transport Mode [Layer2] [Layer3]: Layer3 Virtual Gateway IP Address: 10.254.100.101 Mobility/RF Group Name: wukuang Network Name (SSID): management Allow Static IP Addresses [YES][no]: yes Configure a RADIUS Server now? [YES][no]: no Enable 802.11b Network [YES][no]: yes Enable 802.11a Network [YES][no]: yes Enable 802.11g Network [YES][no]: yes Enable Auto-RF [YES][no]: yes Configuration saved!

Resetting system with new configuration... 至此，WLC初始设置完成。 2．增加AP

打开浏览器，在地址栏输入

https://10.1.128.101，回车后出现安全警报提示（如下图）

点击是，出现Wireless Lan Controller登陆界面（如下图）

点击login，出现输入用户名密码界面，输入初始设置里配置的用户名和密码user:admin

password:minshenma （如下图）

点击确定进入WLC配置主页面（如下图）

点击WLANs，能够看见初始设置中已经建立的WLAN SSID，点击edit（如下图）

选择不广播management的SSID（如下图）