AM27SURC03

www.smdled.com

SUBMINIATURE SOLID STATE LAMP

AM27SURC03 HYPER REDFeatures??SUBMINIATURE PACKAGE.??GULL WING.??LONG LIFE - SOLID STATE RELIABILITY.??LOW PACKAGE PROFILE.??PACKAGE :1000PCS / REEL.??RoHS COMPLIANT.DescriptionThe Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode.Package DimensionsNotes:1. All dimensions are in millimeters (inches).2. Tolerance is ±0.25(0.01\3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.SPEC NO: DSAD1296APPROVED: J. Lu

REV NO: V.3 DATE: APR/07/2005 PAGE: 1 OF 4

CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1202000388

洸子其科技是一家从事发光二极管产品研发、生产及销售公司,致力于为国内国际市场提供高品质，低成本的各类发光管。

主营产品有：SMD LED 0402、0603、0802、0805、1204、1206、3528、5050、3020、3014、2835、3535、335、020、正面发光及

主要应用：照明灯具、灯光亮化装饰工程、玩具礼品、背光显示、荧光验证防伪、手机、家电、MP3、手电筒、汽车、圣诞树、霓虹灯等…

侧面发光，红、绿、蓝、白、黄、橙、粉红、紫、单色双色及三色等…

点击进入洸子其科技

www.smdled.com

www.smdled.com

Selection Guide

Part No.

Dice

Lens Type

Iv (mcd) Viewing @ 20mA Angle Min.

Typ.1000

2 θ 1/220°

AM27SURC03HYPER RED (InGaAlP)WATER CLEAR280

Note:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

Electrical / Optical Characteristics at TA=25°C

SymbolλpeakλD?λ1/2CVFIR

ParameterPeak WavelengthDominant WavelengthSpectral Line Half-width

CapacitanceForward VoltageReverse Current

Device

Typ.

Max.

UnitsnmnmnmpF

2.5 10

VuA

Test Conditions

IF=20mAIF=20mAIF=20mAVF=0V;f=1MHzIF=20mAVR = 5V

Hyper Red 640Hyper Red 628Hyper Red 27Hyper Red 45 Hyper Red 1.9 Hyper Red Absolute Maximum Ratings at TA=25°C

ParameterPower dissipationDC Forward CurrentPeak Forward Current [1]Reverse Voltage

Operating / Storage Temperature

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Hyper Red

170301855

-40°CTo +85°C

UnitsmWmAmAV

SPEC NO: DSAD1296APPROVED: J. Lu

REV NO: V.3 DATE: APR/07/2005 PAGE: 2 OF 4

CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1202000388

www.smdled.com

Hyper RedAM27SURC03SPEC NO: DSAD1296APPROVED: J. Lu

REV NO: V.3 DATE: APR/07/2005 PAGE: 3 OF 4

CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1202000388

www.smdled.com

AM27SURC03Recommended Soldering Pattern(Units : mm)Tape Specifications(Units : mm)Remarks:If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows:1. Wavelength: +/-1nm2. Luminous Intensity: +/-15%3. Forward Voltage: +/-0.1VNote: Accuracy may depend on the sorting parameters.SPEC NO: DSAD1296APPROVED: J. LuREV NO: V.3 DATE: APR/07/2005 PAGE: 4 OF 4 CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1202000388