R16 Tina开发v1.1

刷机

1. 开发板拿到的时候是安卓，先使用PhoenixSuit刷入sun8iw5p1_tina_evb_card0_dong.img 2. 然后再刷入我们自己的img。自己的img需要刷两次，确保成功无误

刷机操作

1. 打开PhoenixSuit软件。在‘在线更新’页面，选择所需刷入的img

2. 3. 4. 5. 6.

连接上开发板与pc，安装配置好驱动，ADB 开机开发板 点击reset

然后长按vol+,直到弹出提示 选择两次‘是’，开始刷机

检查烧录成功如否

如上图显示，opencv已安装成功

应用程序编写与安装

参考cameratest

1. 应用程序文件夹下，有Makefile与src文件夹。这个makefile是供linuxmenuconfig识别

使用。这个有一个约定俗成的规范（百度一下）。

############################################## # OpenWrtMakefile for helloworld program #

# Most of the variables used here are defined in # the include directives below. We just need to # specify a basic description of the package, # where to build our program, where to find # the source files, and where to install the # compiled program on the router. #

# Be very careful of spacing in this file. # Indents should be tabs, not spaces, and # there should be no trailing whitespace in # lines that are not commented. #

############################################## include $(TOPDIR)/rules.mk

# Name and release number of this package PKG_NAME:=cameratest PKG_VERSION:=0.0.1 PKG_RELEASE:=1