外文翻译
学校：江汉大学文理学院学部：机械与建筑工程系部：机械制造及其自动化
5班
姓名：梅中豪
指导老师：李列
[1]This study aims at developing a machine center consisting of is based on an open L-shaped granite base, where a Z-axis platform is mounted on the top of an L-type base, while X and Y-axis platforms are assembled by stacking. Additionally, a fuel tank, WEDG winding mechanism and a work piece control. Equipped with a commercially available PC-Based CNC controller, any processing path and precision motion control can be achieved. In addition, the Z-axis platform includes a
commercially available rapid adapter for the rapid assembly of C-axis rotation, quickly switch between micro-EDM, 100 μm. Combined with a self-developed trigger circuit, it also completed a three-dimensional touch trigger probe. The measurement software was developed with Borland C++ Builder.
Integrating the three-dimensional touch trigger probe with the three-axis linear scale, the three-dimensional coordinates of the measured values were calculated and processed. It
successfully applied to the measurement of point, line, circle and angle.
本研究旨在开发一个加工中心组成的高速微型铣床，微细电火花加工、三坐标测量机。加工中心采用CNC控制器和微细电火花加工电源的商用PC。结构设计是基于一个开放的L形的花岗岩基座，在Z轴平台安装在L型底座的顶部，而X和Y轴平台是由堆叠。此外，一个燃料箱，电极卷绕机构、工件夹持固定到轴工作平台。三轴定位阶段采用伺服电机驱动的丝杠运动控制。配备了一个数控控制器商用PC，任何加工路径和精密运动控制可以实现。此外，Z轴平台包括c轴旋转快速组装使用市售的快速接头，高速微铣削主轴和三维测量探头。这意味着，机器可以快速在微细电火花开关，高速微铣削和三维测量。加工中心的成功产生微探针与一个直径小于100μM.结合自行研制的触发电路前端的球体，它还完成了三维触发式探头。用Borland C++ Builder开发了测量软件。三维触发式测头的三轴线性尺度积分，计算和处理的三维坐标的测量值。它已成功地应用于测量的点，线，圆，角
[2] Different types of geometric models of face-gear with circle line of teeth shown in the paper. Generation of a new geometrical of a face-gear is performed on CNC milling machine. The basic direction of the development geometrical of a face-gear and technology is in the search of new trends and methods focused on improving the quality of products, shortening the
相关推荐：
loading