Ring and Plug Calibration - 图文

来源：用户分享时间：2025/6/2 23:37:40 本文由

说明：文章内容仅供预览，部分内容可能不全，需要完整文档或者需要复制内容，请下载word后使用。下载word有问题请添加微信号:xxxxxxx或QQ：xxxxxx 处理（尽可能给您提供完整文档），感谢您的支持与谅解。

Gauges and GaugingFixed -Limit GaugesAdjustable Thread Ring Gauge SettingLoosen the Locking Screw

Turn the Adjusting Screw so the Ring will open

Gauges and GaugingFixed -Limit GaugesAdjustable Thread Ring Gauge SettingRotate Ring onto the full form section of the Setting Plug

Gauges and GaugingFixed -Limit GaugesAdjustable Thread Ring Gauge SettingWork with the Adjusting Screw until there is a slight drag. Tighten locking screw.

Gauges and GaugingFixed -Limit GaugesAdjustable Thread Ring Gauge SettingRotate ring onto truncated (front) section of Setting Plug

Examine for shake or wobble.

搜索更多关于： Ring and Plug Calibration - 图文的文档

Ring and Plug Calibration - 图文.doc 将本文的Word文档下载到电脑，方便复制、编辑、收藏和打印

下载这篇word文档

本文链接：https://www.diyifanwen.net/c15ttx11eyo6i8ss1cmuo_7.html（转载请注明文章来源）