Avaya CMS安装总结

2.系统重启，按stop+a进入OK模式

>setenv auto-boot ? false 关闭自动导入 >reset-all 重新启动

>probe-scsi-all 检测SCSI设备

Target4: tape Target4:磁带机的ID号（背面） >setenv auto-boot ? true 开启自动导入 >boot -r 导入

3.系统重启后/dev/rmt下面将自动生成文件，插入磁带，运行mt -f /dev/rmt/0c status，确认磁带

0719FI500Y# mt -f /dev/rmt/0c status HP DAT-72 tape drive:

sense key(0x6)= Unit Attention residual= 0 retries= 0 file no= 0 block no= 0 0719FI500Y#) （二）执行cmssvc (

SunOS 5.9

login: root

Last login: Fri Nov 16 15:07:36 from :0 0730FI103H#

0730FI103H# cmscvs

ksh: cmscvs: not found 0730FI103H# cmssvc

Avaya(TM) Call Management System Services Menu

Select a command from the list below.

1) auth_display Display feature authorizations 2) auth_set Authorize capabilities/capacities 3) run_ids Turn Informix Database on or off 4) run_cms Turn Avaya CMS on or off

5) disk_space Format/Assign disk space to Database Server 6) setup Set up the initial configuration 7) swinfo Display switch information 8) swsetup Change switch information

9) patch_inst Install a single CMS patch from CD 10) patch_rmv Backout an installed CMS patch

11) load_all Install all CMS patches found on CD

12) back_all Backout all installed CMS patches from machine Enter choice (1-12) or q to quit: 6

CMS needs to be turned off before invoking this command.

0730FI103H# 4

ksh: 4: not found 0730FI103H# cmssvc

Avaya(TM) Call Management System Services Menu

Select a command from the list below.

1) auth_display Display feature authorizations 2) auth_set Authorize capabilities/capacities 3) run_ids Turn Informix Database on or off 4) run_cms Turn Avaya CMS on or off

5) disk_space Format/Assign disk space to Database Server 6) setup Set up the initial configuration 7) swinfo Display switch information 8) swsetup Change switch information

9) patch_inst Install a single CMS patch from CD 10) patch_rmv Backout an installed CMS patch

11) load_all Install all CMS patches found on CD

12) back_all Backout all installed CMS patches from machine Enter choice (1-12) or q to quit: 4

Select one of the following 1) Turn on CMS

2) Turn off CMS but Leave IDS running 3) Turn off both CMS and IDS Enter choice (1-3): 2

Notifying users of impending shutdown... . . . . . . .

Proceeding with cms shutdown.

*** Turning off CMS, Please wait *** . . . . . . . . .

*** Cleaning up, Please wait ***

*** CMS is now off ***

0730FI103H# cmssvc

Avaya(TM) Call Management System Services Menu

Select a command from the list below.

1) auth_display Display feature authorizations 2) auth_set Authorize capabilities/capacities 3) run_ids Turn Informix Database on or off 4) run_cms Turn Avaya CMS on or off

5) disk_space Format/Assign disk space to Database Server 6) setup Set up the initial configuration 7) swinfo Display switch information 8) swsetup Change switch information

9) patch_inst Install a single CMS patch from CD 10) patch_rmv Backout an installed CMS patch

11) load_all Install all CMS patches found on CD

12) back_all Backout all installed CMS patches from machine Enter choice (1-12) or q to quit: 6

Warning!!! Setup has already been performed.

Running this command will remove all CMS data in the database. Do you wish to proceed and re-configure CMS? (y/n): (default: n) y

Select the language for this server:

All languages are ISO Latin except Japanese. Selection of the

server language assumes that existing customer data is compatible. (Upgrade from any ISO Latin language to any ISO Latin language or from Japanese to Japanese is supported).

1) English 2) Dutch 3) French 4) German 5) Italian 6) Portuguese 7) Spanish 8) Japanese

Enter choice (1-8): (default: 1) 1

The input will be read from 1) the terminal 2) a flat file Enter choice (1-2): 1

## Initializing Customer CMS data . . .

.......................................................................

..

Customer CMS data successfully initialized.

Enter a name for this UNIX system (up to 256 characters): (default: 0730FI103H)

Select the type of backup device you are using 1) 40.0+ Gbyte 4mm or 8mm tape 2) 14.0 Gbyte 8mm tape

3) SCSI 4-8 SLR cartridge tape - 4GB tape (8GB compressed) Enter choice (1-3): 1

Enter the default backup device path: (default: /dev/rmt/0c)

Enter number of ACDs being administered (1-1): (default: 1) 1

Information for ACD 1

Enter switch name (up to 20 characters): S8720

Select the model of switch for this ACD 1) Definity-R9/R10 2) MultiVantage R1 3) Communication Mgr 2 4) Communication Mgr 3.0 5) Communication Mgr 3.1 6) Communication Mgr 4 Enter choice (1-6): 6

Is Vectoring enabled on the switch? (y/n): y

Is Expert Agent Selection enabled on the switch? (y/n): y

Does the Central Office have disconnect supervision? (y/n): (default: y) y

Enter the local port assigned to switch (1-64): 1

Enter the remote port assigned to switch (1-64): 1

Select the transport to the switch 1) TCP/IP

Enter choice (1-1): 1

Enter switch host name or IP Address: 172.16.207.6

Enter switch TCP port number (5001-5999): (default: 5001) 5001

Number of splits/skills (0-2000): (default: 500)

Total split/skill members, summed over all splits/skills (0-9000): (default: 500 0)

Number of shifts (1-4): (default: 1)

Enter the start time for shift 1 (hh:mmXM): (default: 8:00 AM)

Enter the stop time for shift 1 (hh:mmXM): (default: 5:00 PM)

Number of agents logged into all splits/skills during shift 1 (0-5000): (default : 5000)

Number of trunk groups (0-2000): (default: 500)

Number of trunks (0-12000): (default: 1000)

Number of unmeasured facilities (0-6000): (default: 500)

Number of call work codes (1-1999): (default: 1000)

Enter number of vectors (0-2000): (default: 500)

Enter number of VDNs (0-20000): (default: 4000)

Updating database.

Computing space requirements and dbspace availability. n )

配置一般安装以上进行配置,各个描述如下:

进入setup 选择语言