博科BrocadeSAN交换机常用命令 - 图文

博科Brocade SAN交换机常用命令

1.查看IP地址命令 ................................................................................................................. 2 2.查看firmware版本 ............................................................................................................. 2 3.查看交换机状态 ................................................................................................................... 2 4.查看交换机license-id ...................................................................................................... 3 5.配置ZONE .............................................................................................................................. 3 6.查看zone配置文件 ............................................................................................................. 4 7.查看ZONE .............................................................................................................................. 5 8.查看系统日志信息 ............................................................................................................... 6 9.关机 ....................................................................................................................................... 6 10.设置博科Brocade交换机IP地址 ................................................................................... 6 11.博科brocade交换机查看OS版本信息 ........................................................................... 6 12.博科brocade交换机添加license授权信息 ................................................................. 7 13.查看博科brocade交换机license授权信息 ................................................................. 7 14.博科Brocade Slikworm 300交换机license ................................................................ 7 15.博科Brocade交换机修改密码命令 ................................................................................. 7 16.博科 brocade SAN交换机密码重置 ................................................................................ 7 17.登陆后是用passwddefault命令恢复出厂密码 ............................................................. 9 18.交换机升级 ......................................................................................................................... 9 19.帮助信息 ........................................................................................................................... 13

1.查看IP地址命令

swd77:admin>ipaddrshow SWITCH

Ethernet IP Address: 10.77.77.77 Ethernet Subnetmask: 255.255.255.0 Fibre Channel IP Address: none Fibre Channel Subnetmask: none Gateway IP Address: none DHCP: Off swd77:admin>

2.查看firmware版本 swd211:admin>

swd211:admin>firmwareshow

Appl Primary/Secondary Versions

------------------------------------------ FOS v6.2.1 v6.2.1

3.查看交换机状态

swd211:admin>switchoshow

rbash: switchoshow: command not found swd211:admin> switchshow switchName: swd211 switchType: 34.0

switchState: Online switchMode: Native switchRole: Principal switchDomain: 1

switchId: fffc01

switchWwn: 10:00:00:05:1e:02:a2:10 zoning: ON (FC01) switchBeacon: OFF

Area Port Media Speed State Proto =====================================

0 0 id N2 Online F-Port 50:08:05:f3:00:1b:4e:91 1 1 id N4 Online F-Port 10:00:00:00:c9:53:b2:8d 2 2 id N4 Online F-Port 10:00:00:00:c9:53:b3:c1 3 3 id N4 Online F-Port 10:00:00:00:c9:53:b3:c2 4 4 id N4 Online F-Port 50:06:0b:00:00:66:00:c4 5 5 id N4 Online F-Port 50:06:0b:00:00:66:01:1e 6 6 id N2 Online F-Port 50:05:08:b3:00:93:b2:81

7 7 -- N4 No_Module

8 8 id N4 Online F-Port 50:01:43:80:04:c7:87:d8 9 9 id N4 Online F-Port 50:01:43:80:04:c7:87:dc 10 10 id N4 Online F-Port 50:01:43:80:06:31:cf:7c 11 11 -- N4 No_Module 12 12 -- N4 No_Module 13 13 -- N4 No_Module 14 14 -- N4 No_Module 15 15 -- N4 No_Module swd211:admin>

4.查看交换机license-id swd211:admin>

swd211:admin>licenseidshow 10:00:00:05:1e:02:a2:10 swd211:admin>

5.配置ZONE 案例:

1) Create Aliases

>alicreate “Eng_Host”,“1,0”

>alicreate “Eng_Stor”,“1,4; 1,5” >alicreate “Mkt_Host”,“Mktwwn”

>alicreate “Mkt_Stor”,“s3wwn; s4wwn; s5wwn” 2) Create Zones

>zonecreate “Zone_Eng”,“Eng_Host; Eng_Stor” >zonecreate “Zone_Mkt”,“Mkt_Host; Mkt_Stor” 3) Create Configuration

>cfgcreate “Cfg_EngMkt”,“Zone_Eng; Zone_Mkt”

sw4100:admin> cfgshow Defined configuration: cfg: Cfg_EngMkt Zone_Eng; Zone_Mkt

zone: Zone_Eng Eng_Host; Eng_Stor zone: Zone_Mkt Mkt_Host; Mkt_Stor alias: Eng_Stor 1,4; 1,5 alias: Eng_Host 1,0

alias: Mkt_Stor 21:00:00:20:37:87:49:29; 21:00:00:20:37:87:e5:20; 21:00:00:20:37:87:20:c5

alias: Mkt_Host 21:00:00:20:37:87:23:e2 Effective configuration:

no configuration in effect

4) Enable Configuration >cfgenable “Cfg_EngMkt”

sw4100:admin> cfgshow Defined configuration: cfg: Cfg_EngMkt one_Eng; Zone_Mkt

zone: Zone_Eng Eng_Host; Eng_Stor zone: Zone_Mkt Mkt_Host; Mkt_Stor alias: Eng_Stor 1,4; 1,5 alias: Eng_Host 1,0

alias: Mkt_Stor 21:00:00:20:37:87:49:29; 21:00:00:20:37:87:e5:20; 21:00:00:20:37:87:20:c5

alias: Mkt_Host 21:00:00:20:37:87:23:e2 Effective configuration: cfg: Cfg_EngMkt

zone: Zone_Eng 1,0; 1,4; 1,5

zone: Zone_Mkt 21:00:00:20:37:87:23:e2; 21:00:00:20:37:87:e5:20; 21:00:00:20:37:87:49:29; 21:00:00:20:37:87:20:c5

6.查看zone配置文件 swd211:admin>

swd211:admin>cfgshow Defined configuration:

cfg: FC01 OADB_ML6030; SPC_MSA1000; SFDB_EVA4400; SFDB04_MSA1500; SFEVA4400_SMA zone: OADB_ML6030

1,7; 1,14; 1,15 zone: SFDB04_MSA1500 1,10; 1,6 zone: SFDB_EVA4400

1,3; 1,4; 1,5; 1,7; 1,8; 1,9 zone: SFEVA4400_SMA

1,8; 1,9; 1,11 zone: SPC_MSA1000

1,0; 1,1; 1,2; 1,7

Effective configuration: cfg: FC01

zone: OADB_ML6030 1,7 1,14 1,15 zone: SFDB04_MSA1500