广 州 高 优 电 子 科 技 有 限 公 司
------中国最大的门禁、电锁制造商
2、Sequence number:
When more than one controller connected, each controller can be identified by the sequence number; The sequence number can be viewed by press ESC twice、then press 8 8 , and long press ENT . 3、RS485 communication terminal resistance set up:
When the unit needs long distance communication through RS485, it should be rely on the resistance for impedance matching, to make the communication more smooth, and ensure the data veracity. At the whole network, only need to configure the terminal resistance at the longest controller with the computer, the all JP1 jumper has to be moved at other controllers. 4、 The wire connection between the controller and the communication converter: connect 485A+
(Blue wire) of the controller with the converter?s T/P+；controller?s 485-（Yellow wire）with the converter?s T/R-。earthling when all the shield layer are connected. 市场部经理：符秋生 手 机：13416455859 电 话：020-22104301；22151161；87573254 传 真：020-87564590 电子邮箱：couns@sina.com 网 址：www.couns.net 公司地址：广州市龙口西路96号天成大厦二座15楼 邮 编：510630 广 州 高 优 电 子 科 技 有 限 公 司
------中国最大的门禁、电锁制造商
Troubleshooting
1、 The indication light is no light: The power is not connected or the power supply is not in good condition.
2、 No display at the monitor: the voltage is too low, or the 103 micro adjust resistance is not adjusted properly , it should be adjusted several circles clockwise.
3、 The buzzer always alarm: Anti-remover switch is loose, or the door magnetic switch is not connected when set up the door status monitor.
4、 Fingerprint Verification failure：fingerprint is not registered or the registered fingerprint is not correct..
5、 Card reader can not read the card: the connect wires is not in proper condition, or the card read used is not compatible.
6、 If the user has other troubleshooting can not solve, please contact with your local sales agency.
Original accessory
Access and attendance controller : One Piece Screw : One bag
Connect wires: One set ( Four pieces)
CD-Rom: one（Access and attendance management software） User?s manual: one piece
Software installation 1、 Running condition：
Hardware: Pentium 586 or above, memory : 64M，hard disk : should bigger than 200M，Monitor resolution should 市场部经理：符秋生 手 机：13416455859 电 话：020-22104301；22151161；87573254 传 真：020-87564590 电子邮箱：couns@sina.com 网 址：www.couns.net 公司地址：广州市龙口西路96号天成大厦二座15楼 邮 编：510630 广 州 高 优 电 子 科 技 有 限 公 司
------中国最大的门禁、电锁制造商
be: 800X600 or above，has spare COM port
Operation System: windows98/XP/2000 Chinese or English version 2、 Software installation：
Double click:\\CU-F360.exe to enter into the installation program
Press Nest step ( N) 市场部经理：符秋生 手 机：13416455859 电 话：020-22104301；22151161；87573254 传 真：020-87564590 电子邮箱：couns@sina.com 网 址：www.couns.net 公司地址：广州市龙口西路96号天成大厦二座15楼 邮 编：510630 广 州 高 优 电 子 科 技 有 限 公 司
------中国最大的门禁、电锁制造商
After Setting up the installation directory, press Next step( N) to continue installation, We suggest you install the system by default directory, you can press cancel to escape the installation, otherwise press Nest step( N)
Press Nest step( N)
Press Installation(I) 市场部经理：符秋生 手 机：13416455859 电 话：020-22104301；22151161；87573254 传 真：020-87564590 电子邮箱：couns@sina.com 网 址：www.couns.net 公司地址：广州市龙口西路96号天成大厦二座15楼 邮 编：510630
相关推荐：
loading