校核：审核：批准：Verify:Check:
编写：
施 工 措 施
厂 房 桥 机 安 装
Power House EOT Crane Installation Construction Program
Approve:
Compile:
I.
II.
III.
5.
2.
目录Content
9.
8.
7.
6.
4.
3.
1.
4.
3.
2.
1.
3.
2.
1.
桥机电气部分设备安装：
主、副小车运行机构以及起升机构组装
IV.170T/10T、10T桥机安装方案170T/10T, 10T BRIDGE CRANE INSTALLATION PROGRAM...................21
ELECTRICAL PARTS EQUIPMENT INSTALLATION OF BRIDGE CRANE...............................................................31
安装工艺流程简介BRIEF INTRODUCTION OF INSTALLATION TECHNOLOGY FLOW..............................21
桥机设备吊装方案确定BRIDGE CRANE EQUIPMENTS LIFTING PROGRAM CONFIRMED.......................................11
桥机主要大件吊装 BRIDGE CRANE MAIN LARGE PARTS LIFTING..........................................................12
ASSEMBLY OF MAIN, DEPUTY SMALL TROLLEY RUNNING MECHANISM AND HOISTING MECHANISM................28
10.质量控制点 QUALITY CONTROL POINT.................................................................................................37
施工组织及资源配置CONSTRUCTION ORAGANIZATION AND RESOURCE ALLOCATION.......................6
施工概述 BRIEF...................................................................................................................................3
保护措施 PROTECTION MEASUREMENTS......................................................................................................31
起升机构钢丝绳穿绕 HOISTING MECHANISM WIRE ROPE REEVING....................................................30
小车安装要求：THE REQUIREMENTS OF SMALL TROLLEY INSTALLATION:............................................28
小车架组装 ASSEMBLY OF SMALL TROLLEY FRAME..............................................................................27
安装流程图 INSTALLATION FLOW CHART..............................................................................................23
桥机设备运输及吊装BRIDGE CRANE EQUIPMENT TRANSPORTATION LIFTING..............................11
桥机各主要部件的安装及组装INSTALLATION AND ASSEMBLY OF EACH MAIN PART OF BRIDGE CRANE................23
桥机设备吊装机械选型........................................................................................................................12
桥机设备起重运输机械选型BRIDGE CRANE EQUIPMENT HOISTING TRANSPORTATION MECHANISM CHOOSE TYPE.11
桥式起重机参数：THE PARAMETER OF CRANE......................................................................................3
工程内容：CONTENT OF WORK....................................................................................................................3
安装场地规划 LAYOUT OF INSTALLATION SITE.......................................................................................5
2
2.
170T/10T。
a、
1.
大车轨道：
本体尺寸 Size of the crane
整机自重： T
工作级别： 级
电机总功率： KW
The rail of big trolley:
Working grade: Grade
Trolley span: 5300 mm
工程内容：Content of work
Carriage span: 18000 mm
桥机小车跨度：5300 mm
Total power of the motor:
桥机大车跨度： 18000 mm
大梁至车轮处高度： mm
小车外形尺寸：长×宽×高=
主梁外形尺寸：长×宽×高=
安装及协助调试等工作。一台为主桥机170T/10T/10T，另一台为副桥机
lead gantry). One is master crane 170T/10T/10T; one is slave crane170T/10T.
桥式起重机参数：Technical Specification of Crane
该项目包括二台厂房桥式起重机（含轨道、滑触线等）的运输、二次倒运、
commissioning assistance, etc work of two EOT bridge cranes (including rail and main
The project includes the transportation, secondary transportation, installation and
The weight of whole crane: T
I.施工概述 Brief
The height from the crossbeam to wheel: mm
Main beam dimensions: Length multiply width multiply height equal
Small trolley dimensions: Length multiply width multiply height equal
3
KW
e、
起升高度： m起升高度： m起升高度： m额定起重量： T额定起重量： TLifting height: mLifting height: mLifting height: m起升速度： m/min起升速度： m/min
c、
d、
b、
额定起重量： T
of bridge crane≤ m起升速度： m/minLifting speed: m/min
Lifting speed: m/min
Lifting speed: m/min
Rated lifting weight: T
Rated lifting weight: T
Rated lifting weight: T
大钩特性 Characteristic of main hook
小钩特性Characteristic of deputy hook
吊钩极限位置 Limit position of lifting hook
surface of bridge crane≤ m
副钩吊点中心距桥机轨面距离≤ m
主钩吊点中心距桥机轨面距离≤ m
主桥机电动葫芦特性 Characteristic of master crane electrical block
主钩至轨道中心距：上游侧= m 下游侧= m＜ m
The distance from the main hook to the center of the rail: upstream
The distance from the center of main hook lifting point to rail surface
The distance from the center of deputy hook lifting point to rail
4
3.
f、
side= m＜ m桥机安装时单件重量表
小车 ： KG Small trolley: KG
主梁Ⅰ： KG
Main beam Ⅰ: KG
安装场地规划 Layout of installation site
吊装时，吊车布置在安装间的适当位置进行工作。.
side= m, downstream side= m＜ m
副钩至轨道中心距：上游侧= m＜ m
powerhouse, carry out the large pieces lifting at erection bay, during lifting,
mobile crane arrange the suitable position of erection bay to work.
The weight list of the single piece during install the bridge crane
桥机安装施工时，安装工位为主厂房安装间段，在安装间进行大件吊装，
The distance from the deputy hook to the center of the rail: upstream
During install the bridge crane, the installation site is erection bay of main
5
主梁Ⅱ： KG
Main beam Ⅱ: KG
相关推荐：
loading