接线图 1734-IE8C(15)

12 POINT I/O 8 Channel High Density Current Input Modules

Install a 1734-TOPS Base

1.Position the base vertically above the installed units, such as an adapter, power supply, or existing module.2.Slide the base down, allowing the interlocking side pieces to engage the adjacent installed unit.3.Press firmly to seat the base on the DIN rail until the base snaps into place.4.Verify that the DIN-rail locking screw is in a horizontal, locked position before inserting an I/O module.

Remove a 1734-TOPS Base

To remove a wiring base from the DIN rail, you must remove the module installed to the right of the base.

1.Squeeze the module locking mechanism of the module to the right of the base, pulling up to remove the module.2.Turn the orange locking screw to a vertical position to unlock the base from the DIN rail.3.Slide the base up to release it from its mating units.

Communicating with Your Module

I/O messages are sent to (consumed) and received from (produced) the POINT I/O modules. These messages are mapped into the processor’s memory. This POINT I/O input module produces 24 bytes of input data (scanner Rx) and fault status data. It does not consume I/O data (scannerTx).

Publication 1734-IN033B-EN-P - November 2010

搜索“diyifanwen.net”或“第一范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，第一范文网，提供最新人文社科接线图 1734-IE8C(15)全文阅读和word下载服务。