第一范文网 - 专业文章范例文档资料分享平台

红外图像实时显示与高速存储系统的实现

来源:用户分享 时间:2021-06-02 本文由岛与幕歌 分享 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:xxxxxx或QQ:xxxxxx 处理(尽可能给您提供完整文档),感谢您的支持与谅解。

2010年10月 Infrared Technology Oct. 2010

红外图像实时显示与高速存储系统的实现

赵新宇1,2,乔彦峰1,王方雨1,2,何 昕1,朱 玮1,魏仲慧1

(1.中国科学院长春光学精密机械与物理研究所,吉林 长春 130033;2.中国科学院研究生院,北京 100039)

摘要:针对该系统数据量大、传输速度高、存储时间长等特点;为保证系统稳定性,解决丢帧与错帧

问题,采用多线程技术,创建显示、存储、同步三个并发执行线程,并根据实际工程项目经验,对串口读写次数加以控制,存储成方便操作的一个大文件。实验表明:实际应用在图像分辨率320×256下(最高测试过1280×1024),像素宽度14位,连续存储30 min以上,帧出错率为0,远低于项目的精度要求标准(帧出错率万分之三),通过判读软件回放,图像清晰,靶目标判读精确,应用到某工程项目中。

关键词:红外图像;位图bmp;实时显示;高速存储

中图分类号:TN216 文献标识码:A 文章编号:1001-8891(2010)10-0608-03

The Implementation of the Infrared Image Real-time Display

and High-speed Storage System

ZHAO Xin-yu 1,QIAO Yan-feng1,WANG Fang-yu1,2,HE Xin1,ZHU Wei1,WEI Zhong-hui1

(1.Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;

2.Graduate School of Chinese Academy of Sciences, Beijing 100039, China)

Abstract:Aim to the system, it has features as long storage time, mass of data to deal with, high-speed storage rate and so on. To ensure the stability of the system and solve the dropping frame, wrong frame problem, the author developed the project of the muti-thread technology, Created three threads, display multithreading, storage multithreading and SMT Simultaneous multithreading, which can run concurrently, according to engineering practice, to control the times of a read/write serial port, finally to store a big file which bases on windows bmp format, The tests indicated: under the resolution of 320×256, each pixel occupies 14 bits, to store last for half an hour, the rate of frame wrong is zero, far below standard, the replay image is clear, target interpretation is precise.

Key words:infrared image,bitmap,real-time display,high-speed storage

3)丢帧、错帧总出错率在万分之三以内。

引言

4)目标图像清晰,判读精确。

5)存储成符合项目文件协议格式,附加信息精红外图像记录系统是现代光学靶场测量设备重

确。 要的组成部分。充分利用计算机图像处理技术,以高

速硬盘,如SCSI硬盘作为记录载体[1,2],针对可见光

1 系统组成

图像中目标不清晰的情况下,或是夜间仍旧可以根据目标热源特性成像,以及对目标进一步加以模式识别为了实现本系统,并满足系统的稳定性、可控制的优势,在实时探测军事目标与事后判读靶标均占有性,设计了红外图像实时显示与高速存储系统,如图极其重要的地位。本系统是基于以下的精度要求进行1所示。 研制的。 系统设备:主控计算机、红外存储计算机、网络

1)连续存储时间要求达到30 分钟以上。 交换机、通讯系统、时统、红外摄相机、编码器、伺

服。

2)高速存储100帧/s。

608

搜索“diyifanwen.net”或“第一范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,第一范文网,提供最新人文社科红外图像实时显示与高速存储系统的实现全文阅读和word下载服务。

红外图像实时显示与高速存储系统的实现.doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印
本文链接:https://www.diyifanwen.net/wenku/1193118.html(转载请注明文章来源)
热门推荐
Copyright © 2018-2022 第一范文网 版权所有 免责声明 | 联系我们
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ:xxxxxx 邮箱:xxxxxx@qq.com
渝ICP备2023013149号
Top