report(english version)参考地质资料(7)

report(english version)参考地质资料,x学习英文

Density test was done with core cutter method , two parallel tests were made. E、电阻率测试采用直流电阻率法，以求得土层的视电阻率。

Electricity resistivity test was done with the direct-current resistance method to get “ρ”of the soil.

F、十字板剪切试验采用电测十字板设备进行。

The vane-shear test was done with electronic vane-shear device. G、现场注水试验采用钻孔降水头注水法试验。

The field water injection test was done with the injection method of borehole dewatering.

H、加州承载比试验（CBR）在室内进行，分别在最大干密度、最优含水量情况下及饱和状态下进行试验。

The California bearing ratio (CBR) test was done in the lab and under the conditions of maximum dry density, optimum water content and saturated condition.

I、勘探孔定位以设计孔位坐标为依据，以场地所在化工区内设置的坐标控制点（PG4、PG5、PG6点）为基准，换算成统一的坐标系统，进行现场放样。并测量各孔口高程，采用吴淞高程系统，高程引测于化工区内所设置的PG5点，该点吴淞高程为3.3421m（上海化学工业区提供）。

Based on the coordinates of the designed holes, and the coordinate control points （PG4, PG5 and PG6）set in the Chemical Park, the positioning of the benchmarks is changed into the overall reference coordinates. And the positions are set out accordingly. The altitude of each borehole was measured with the Wusong Altitude system. The starting point of the altitude measurement was Point PG5 in the Chemical Park, and the point was at 3.3421m WuSong level (provided by SCIP).

J、对现场采取的水、土样按要求进行水、土工试验，其中动三轴、共振柱试验经业主同意，以补充资料的形式提交成果。

The water and soil tests on the water and soil samples taken on the field were done in accordance with the requirements. The results of dynamic triaxial tests, and resonant column tests are to be provided in supplements, as approved by the Contractor.

本次勘察工作完成工作量见表2。

Please refer to Table 2 for the investigation work quantity.

7 页 第

搜索“diyifanwen.net”或“第一范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，第一范文网，提供最新资格考试认证report(english version)参考地质资料(7)全文阅读和word下载服务。